Ilart is constantly researching for developing new products such as the manufacture of Tangled yarn.
Within this specialization, we achieve high toughness: 7.5 gr/den in very fine yarn types (and as low as 0.5 to 5 Denier per filament).
Textile application yarn.
All without losing the inherent advantages of Polypropylene thread, which thanks to its low moisture absorption rate, 0.05% helps fabric manufacture and/or multilayer articles that allow the transport of moisture from the body to the surface. This feature is highly appreciated for sports apparel where high effort and extended comfort for high performance is required.
In Ilart we produce a range of 1-5 denier per filament yarns, because of the a wide variety of applications and market our product.
For this reason we fit your needs on Denier, textures, colors and brightness.
The use of our products is due to the properties and characteristics of the fiber listed below:
To improve the intrinsic properties of Polypropylene, Ilart offers special finishes that are crosslinked into the fiber to ensure durability in the yarn. Adding additives with the following properties:
Comparative Chart of FIber Properties | |||||
---|---|---|---|---|---|
Properties | Polypropylene | Polyester | Acrylic | Polyamide | Cotton |
Density (g/cm3) | 0.9 | 1.38 | 1.16 | 1.08 | 1.54 |
Stain resistance | Excellent | Good | Good | Deficient | Deficient |
Chlorine resistance | Excellent | Good | Good | Good | Good |
Moisture absorption % | 0.05 | 0.4 | 2 | 4.5 | 8 |
Durability | Excellent | Excellent | Regular | Good | Regular |
Insulating power (Air = 1) | 0.17 | 0.14 | 0.14 | 0.1 | 0.06 |
Chemical and bacterial resistance | Excellent | Good | Good | Excellent | Good |
Fiber Properties | |||
---|---|---|---|
Metallic flat yarn (M): Metalized polyester film on both sides of the sheet. Ideal for embroidery, ribbons, yarn, knitting and crochet warp…
Caliber: 50, 100 y 150.
Metallic supported yarn (MX): Metallized polyester film, supported in X by two polyester monofilaments. Ideal for embroidery, ribbons, yarn, knitting and crochet warp, flat fabric…
Caliber: 1/69", 1/100"
GIMP yarn: Polyester yarn wounded with metallic thread.
Title: 150, 300 Denier
The use of our products is due to the properties and characteristics of the fiber listed below:
Polypropylene thread wounded with monofilament polyester and metal film, in different colors. We manufacture any kind of color and/or combination.
Ideal for weaving, knitting, flat knitting and crafts.
The use of our products is due to the properties and characteristics of the fiber listed below:
To improve the intrinsic properties of Polypropylene, Ilart offers special finishes that are crosslinked into the fiber to ensure durability in the yarn. Adding additives with the following properties:
Comparative Chart of FIber Properties | |||||
---|---|---|---|---|---|
Properties | Polypropylene | Polyester | Acrylic | Polyamide | Cotton |
Density (g/cm3) | 0.9 | 1.38 | 1.16 | 1.08 | 1.54 |
Stain resistance | Excellent | Good | Good | Deficient | Deficient |
Chlorine resistance | Excellent | Good | Good | Good | Good |
Moisture absorption % | 0.05 | 0.4 | 2 | 4.5 | 8 |
Durability | Excellent | Excellent | Regular | Good | Regular |
Insulating power (Air = 1) | 0.17 | 0.14 | 0.14 | 0.1 | 0.06 |
Chemical and bacterial resistance | Excellent | Good | Good | Excellent | Good |
Fiber Properties | |||
---|---|---|---|
Miguel Hidalgo 29, Col. Coltongo. Azcapotzalco. México D.F., C.P. 02630. Phone 5587 1532 | Fax 5587 1532
©Ilart . All rights reserved. Powered by: DW